The new Aerotech Slide In units

[Nate The Great]

More than happy to help clean upholstery, but i don't own a working portable. I have a steamgeni 733 portable in pieces but it hasn't run since putting it in storage in 1983

You related to Chavez? He had a special love for portables..

 

[BIG WOOD]

I was looking at their pictures of the recovery tank and that thing looks awesome! The recovery tank design is more important to the quality of a machine that almost all of the manufacturers overlook.

I was always disappointed in how my HM, blueline, Amtex and prochem tanks are made

Some were too flimsy, all had the float switch on the FKin side right next to the wall for some dumbass reason so you would break it when you were trying to remove or install it. And some had cheap ass vacuum cuffs on the lid while others had terrible access to clean it out good

This AT one looks like it was thought out very well.

 

[Mr Brightside]

I was looking at their pictures of the recovery tank and that thing looks awesome! The recovery tank design is more important to the quality of a machine that almost all of the manufacturers overlook.

I was always disappointed in how my HM, blueline, Amtex and prochem tanks are made

Some were too flimsy, all had the float switch on the FKin side right next to the wall for some dumbass reason so you would break it when you were trying to remove or install it. And some had cheap ass vacuum cuffs on the lid while others had terrible access to clean it out good

This AT one looks like it was thought out very well.

Do you believe that the waste tank also has a huge impact on suction

 

[Mike Pailliotet]

Do you believe that the waste tank also has a huge impact on suction

The original Vortex tanks with the three inlets, each pointing to scoop air in line with the spilling air, sure made a huge impact.

 

[BIG WOOD]

Do you believe that the waste tank also has a huge impact on suction

I know it has a huge impact. That’s the reason I made that explanation.

The know it all engineers are too ignorant to learn that. Or too cheap

 

[Mike Pailliotet]

Do you believe that the waste tank also has a huge impact on suction

 

[they live]

My stainless butler waste tank flexes.
I still have my cast aluminum tank from the white magic that I felt like was better but I did have the 56 blower with it too.
Ive been wanting to swap it but I would have to reconfigure other things too and just haven't had the motivation.
The vacuum just seemed more consistent with the aluminum tank.

 

[hogjowl]

I don’t understand why that would be.

 

[they live]

I don’t understand why that would be.

What don't you understand?

 

[hogjowl]

Why there’d be a difference in suction between stainless and aluminum tanks.
You’ve got to keep up.

 

[they live]

Why there’d be a difference in suction between stainless and aluminum tanks.
You’ve got to keep up.

Stainless panels flex. When you bend them and make them round they have less flex.
The supports inside break welds due to that flex making them collapse even more.
The cast aluminum is solid and doesn't flex under pressure like the stainless does so the vacuum is more constant from the wand being locked down even though the hose collapses too. The hose doesn't flex like the stainless tank does.
With the aluminum tank the wand locked down faster and stronger.
And it recovered better.

 

[hogjowl]

Forgive me for being skeptical coming from yOu.

 

[Lint Basket]

I was looking at their pictures of the recovery tank and that thing looks awesome! The recovery tank design is more important to the quality of a machine that almost all of the manufacturers overlook.

I was always disappointed in how my HM, blueline, Amtex and prochem tanks are made

Some were too flimsy, all had the float switch on the FKin side right next to the wall for some dumbass reason so you would break it when you were trying to remove or install it. And some had cheap ass vacuum cuffs on the lid while others had terrible access to clean it out good

This AT one looks like it was thought out very well.

We have a new waste tank that nobody has seen yet. It’s installed in our demo van, which is coming to the RMH cleaning at the end of this month. I’m sure Mikey will be climbing all over it, checking it out. We’ll have two waste tank options available in the near future. The stainless steel option is available now and is obviously the pricier choice, but I’m really excited about the second option as well.

 

[hogjowl]

I doubt there’ll be sufficient room for Mikey’s head.

 

[BIG WOOD]

We have a new waste tank that nobody has seen yet. It’s installed in our demo van, which is coming to the RMH cleaning at the end of this month. I’m sure Mikey will be climbing all over it, checking it out. We’ll have two waste tank options available in the near future. The stainless steel option is available now and is obviously the pricier choice, but I’m really excited about the second option as well.

Can you please start showing your demos in an express box van? Squeezing these machines in a normal van only insults its capabilities to enjoy operating them.

 

[Mike Pailliotet]

View: https://youtu.be/ArYpSpbGYTM?si=KP5eS-hErnB68xx7

 

[hogjowl]

Well, I want that demo van. What’s the IV bag hanging under the blower filter for?

 

[Doug Cox]

The hose reels over the machine would be a mess with all the shit that falls off the hose when rolling them up

 

[hogjowl]

Yeah it looks better all over the floor than on the machine right?

 

[Nomad74]

Can you please start showing your demos in an express box van? Squeezing these machines in a normal van only insults its capabilities to enjoy operating them.

What next? Maybe squeeze it into a Corvette?

 

[Nomad74]

Yeah it looks better all over the floor than on the machine right?

Maybe you should rethink this.

 

[Doug Cox]

Long term, yes

 

[SamIam]

Wow, that thing already looks outdated. Does it come with a Members Only jacket?

Dude you ain't buying another machine stock boy, you rich hahahaha.

Nothing like hard work for a hobby.

 

[Nomad74]

Dude you ain't buying another machine stock boy, you rich hahahaha.

Nothing like hard work for a hobby.

I never said I didn't like it. Hell, I might buy one.

 

[SamIam]

I never said I didn't like it. Hell, I might buy one.

Yeah my 570 gotta last me 5 more year 2 -3 days a week

 

[Mr Brightside]

I never said I didn't like it. Hell, I might buy one.

I need a lot more stocks lol my tsla is getting pounded