First time using a Cimex

[Kenny Hayes]

A 15" crb with aggressive brushes and renovators will pull dirt out so they can be encapped.

 

[Dwain Ray]

Sometimes you just have to flush the soil out. Like the Walmart entrance.
Emcap only works when you can push the soil down out of sight.
Thats why vacuuming is the first step. You have to make room for what the pads can't pick up.

Sounds like the old Murphys oil soap slogan " the dirt is finish and the finish is fine"

 

[they live]

A 15" crb with aggressive brushes and renovators will pull dirt out so they can be encapped.

Hot Water and soap is a better carrier.
Do you use a brush to clean your hands after playing in the dirt or working on an oily machine?

 

[Dwain Ray]

Hot Water and soap is a better carrier.
Do you use a brush to clean your hands after playing in the dirt or working on an oily machine?

I use a brush to clean my hands after working on an oily machine ( with soap n hot water too)

 

[Kenny Hayes]

We're discussing a mat, not my hands. But, a brush will work.

 

[they live]

We're discussing a mat, not my hands. But, a brush will work.

I agree a crb would help. But not as good or fast as a truckmount. But wicking will be an issue.

 

[they live]

I use a brush to clean my hands after working on an oily machine ( with soap n hot water too)

A powered extraction brush with spray jets would be the way to go.

 

[Dwain Ray]

A powered extraction brush with spray jets would be the way to go.

Too much trouble, i already use a ringer to dry um. Hands can only take so much

 

[they live]

Too much trouble, i already use a ringer to dry um. Hands can only take so much

View attachment 132291

Lol I mean on very heavily soiled carpet.

I was thinking a 15 inch crb in a housing with a bunch of jets hooked to a truckmount vacuum. Dare I say a vacuum front and back with large slotted glides.

It would be the ultimate drag wand. Even put some wheels on it to make it a push pull system.

Probably one out there already but I couldn't find anything on a quick search.

 

[Dwain Ray]

Lol I mean on very heavily soiled carpet.

I was thinking a 15 inch crb in a housing with a bunch of jets hooked to a truckmount vacuum. Dare I say a vacuum front and back with large slotted glides.

It would be the ultimate drag wand. Even put some wheels on it to make it a push pull system.

Probably one out there already but I couldn't find anything on a quick search.

About 3 or 4 months back someone posted a picture of a powerhead just as you just explained . It was built in Italy and was about 1500.00 ill be damned if i can find it now or any info. I actually found one on ebay back then . This is what i have but it doesn't have a brush there are a few portable machines that have an attachment like you described
Mine is, 16" wide, 4jets, zinc weighted, itll pickup virtually everything it puts out even at a stand still . Only has single vacuum slot though